23
May 2019
Pre-coating film coating technology and its influence on the binding of bookb...
Pre-coating film coating technology and its influence on the binding of bookbinding In recent years, the film is basically a pre-coated film. Since the use time is not long and there are many probl
23
May 2019
How to do a good job in the offset printing process
How to do a good job in the offset printing process In the offset printing process, especially the monochrome offset printing machine, regardless of Y, M, C, BK four-color printing, or trademarks,
23
May 2019
Analysis of the cause of dirty on PS plate in offset printing
Analysis of the cause of dirty on PS plate in offset printing In offset printing, the PS plate is a common problem. This article only briefly analyzes the structural features, printing process, pri
23
May 2019
In addition to the PS version of the dirty
In addition to the PS version of the dirty If there is no baked plate, if you find that the layout is dirty after you get on the machine, you have to use a long-bar brush to remove the masking past
23
May 2019
The requirements of offset printing on blankets and their loading techniques
The requirements of offset printing on blankets and their loading techniques First, the three characteristics of offset printing 1. Offset printing utilizes the intermediate roller of the elastomer
23
May 2019
The influence of various physical properties of blanket on the quality of pri...
The influence of various physical properties of blanket on the quality of printed matter The thickness is expressed and measured. The thickness value indicated is called “nominal thickness”. The re
23
May 2019
Talking about the technical standard of book EVA hot melt adhesive
Talking about the technical standard of book EVA hot melt adhesive The hot melt adhesive is a solid at normal temperature, gradually softens upon heating and becomes a viscous liquid having a certa
23
May 2019
SCREEN5055 error report!
SCREEN5055 error report! SET FILM MAG cassette is not installed, and the cassette is loaded. SET COLLECT BOX is not loaded, and the cassette is loaded. CHANGE COL BOX The film is not taken ou
23
May 2019
CREO 800V imagesetter common error message
CREO 800V imagesetter common error message PLOTTER: Startup Failed Photographer failed to start Solution: Check the error message in the information bar, handle it accordingly, and restart th
23
May 2019
Summary of ECRM photo-setting machine VR and mako series maintenance experience
Summary of ECRM photo-setting machine VR and mako series maintenance experience 1: Fault Description: Bottom gray. Fault analysis: caused by the laser being too strong. The system test pattern 2 i
22
May 2019
ECRM series phototypesetting machine error information analysis and solution
ECRM series phototypesetting machine error information analysis and solution 1.SYSTEM ERROR #1 [Fault Description]: The problem of filming
22
May 2019
Analysis of the compression phenomenon of ECRM-1030 laser imagesetter
Analysis of the compression phenomenon of ECRM-1030 laser imagesetter At present, many users are using the ECRM-1030 imagesetter, most of which have a usage time of 4-5 years. The prominent problem
