SCREEN5055 error report!
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
SET FILM MAG cassette is not installed, and the cassette is loaded.
SET COLLECT BOX is not loaded, and the cassette is loaded.
CHANGE COL BOX The film is not taken out, the film is taken out
MATERIAL EXIST film position error, adjust film position
PLEASE CUT FILM The discharged film is left in the machine and the CUT command is executed.
PLEASE SET FILM does not load film, execute SET command
PLEASE LOAD FILM No film loaded, execute LOAD command
FILM EMPTY1 film runs out, removes the remaining film, and loads new film
FILM EMPTY2 film runs out, removes the remaining film, and loads new film
SHUT THE DOOR film runs out, removes the remaining film, and loads new film
RESTART DL-MIDE restarts DOWNLOAD mode
FILM EMPTY3 film runs out, removes the remaining film, and loads new film
WIDTH NOT ENORGH The exposure width set by the computer is greater than the film width is greater than the film width. Please enter the correct value.
FAN1 TROUBLE Incoming fan 1 is bad
FAN2 TROUBLE Inlet fan 2 is bad
FAN3 TROUBLE Inlet fan 3 is bad
FAN4 TROUBLE Inlet fan 4 is bad
AFP POWER OFF1 AFP power is off, please turn it on
AFP NOT READY AFP is starting, please wait
AFP POWER OFF2 AFP stops, power on (standby)
AFP BUSY AFP is busy, please wait
DOWNLOAD ERROR Download task failed
MODE MIXMATCH startup mode error, check the DIP switch on the MCON board
CHANGE FILM MAG Replacement Film Case
PUNCH DUST FULL Punched pieces are full, cleaned up
IMPUT DATA ERROR Input data does not meet the exposure conditions, check the input data
LOADING ERROR Film is wrong at the starting sensor position, adjust its position
FILM FAM1 film is in the wrong position of the middle sensor, adjust its position
FILM FAM2 film is in the wrong position of the combined sensor, adjust its position
FILM FAM3 film is in the wrong position of the emission sensor, adjust its position
FILM FAM4 film stops at the position of the emission sensor and adjusts its position
FILM FAM5 film is in the wrong position of the end sensor, adjust its position
FILM FAM6 film stops at the end sensor position error, adjust its position
FILM FAM7 film transfer does not work when the film is transferred, adjust its position
FILM FAM11 film stops at the position of the emission sensor and adjusts its position
FILM FAM12 film is in the wrong position at the end of the sensor, adjust its position
FILM FAM13 film stops at the end of the sensor position error, adjust its position
FILM FAM14 film falls into the AT unit and adjusts its position
MACHINE ERROR1 Crop part error (sensor is on or off)
MACHINE ERROR2 Crop part error (front sensor is not turned on)
MACHINE ERROR3 Crop part error (post-cut sensor is not turned on)
MACHINE ERROR4 post buffering error (post buffering sensor is not closed, post buffering is not turned on)
MACHINE ERROR5 post buffering error (post buffering sensor is not turned on, post buffering is not turned off)
MACHINE ERROR6 Front buffer guide error (two or more front buffer guide sensors are open)
MACHINE ERROR7 Front buffer guide error (the sensor is not turned on when the current buffer guide is turned on)
MACHINE ERROR8 Front buffer guide error (the sensor is not turned on when the current buffer guide is closed)
MACHINE ERROR9 Front buffering guide error (the sensor is not turned on when the current buffer is in the REWIND position)
MACHINE ERROR10 AT guidance sensor is not closed, AT guidance sensor is not closed, AT guidance is not open)
MACHINE ERROR11 AT guide sensor is not closed, AT guide sensor is not turned on, AT guide is not off)
MACHINE ERROR12 Exposure process error (EXP-END signal not detected)
MACHINE ERROR13 ND conversion unit error (ND conversion sensor is not turned on or off)
MACHINE ERROR14 Start exposure error (page signal is not turned on)
MACHINE ERROR15 Initial exposure error (connection start pulse signal not detected)
MACHINE ERROR16 Prism error (no prism acceleration signal detected)
MACHINE ERROR17 Front buffer stick detection sensor error (sensor fully open)
MACHINE ERROR18 Front buffer stick detection sensor error (the sensor is not turned on when the current buffer stick is raised)
MACHINE ERROR19 Front buffer stick detection sensor error (the sensor is not closed when the current buffer stick is lowered)
MACHINE ERROR20 Front punch unit error (front punch sensor is not open, punch unit does not drop)
MACHINE ERROR21 Front punch unit error (front punch sensor is not closed, punch unit does not rise)
MACHINE ERROR22 End punch unit error (front punch sensor is not open, punch unit does not drop)
MACHINE ERROR23 End punch unit error (front punch sensor is not closed, punch unit does not rise)
MACHINE ERROR24 Receiver position error
MACHINE ERROR30 Machine initialization error when power is turned on
STOP Press the stop button and the operation stops.
AFP ERROR1 film stuck in the process of passing to the punch
AFP ERROR2 film stuck in the punch
AFP ERROR3 punch motor stop
AFP ERROR4 The door is open, please close
AFP ERROR9 Crusher development temperature error
AFP ERROR10 Crusher fixing temperature error
AFP ERROR11 Crushing drying temperature error
AFP ERROR12 Crushing developing tank liquid level drop
AFP ERROR13 Crushing fuser tank level drops
AFP ERROR14 Crushing cleaning tank level drops
AFP ERROR17 Crusher developer fill tank level drop
AFP ERROR18 Crusher fixer replenishment tank level drop
AFP ERROR19 flushing machine cleaning tank fill tank level drop
AFP ERROR20 Chong water replenishment tank liquid level drop
AFP ERROR22 The limit of the liquid level of the waste development tank
AFP ERROR23 The machine's waste fixing tank liquid level reaches the upper limit
AFP ERROR24 Crusher waste cleaning tank liquid level reaches the upper limit
AFP WARNING9 Replacement developing filter
AFP WARNING10 Replacement fuser filter
AFP WARNING11 Replacement Cleaning Filter 1
AFP WARNING12 Replacement Cleaning Filter 2
AFP WARNING13 Replace Air Drain Filter
SERIAL ERROR11 AFP transmission error (AFP SIDE)
SERIAL ERROR10 AFP transmission error (FT-R SIDE)
I/F ERROR 1 AFP information transmission error (SCSI BUS), restart the system
SERIAL ERROR01 Interface unit RS information transmission error, restart the system
SERIAL ERROR00 MCON board RS information transmission error, restart the system
IMAGE ERROR SCSI information transmission error (exposure graphics read data before the hard disk), restart the system
I/F COM ERROR1 SCSI information transmission error (CDB parameter error), restart the system
I/F COM ERROR2 SCSI information transmission error (no output received operation command), restart the system
I/F COM ERROR3 CDB error (SCSI) reboot system
I/F ERROR2 SCSI error (selection of logical unit except 0) task
I/F ERROR3 SCSI transfer command error, restart the system
I/F ERROR4 SCSI transfer command error, restart the system
DISK**ERROR HDD error