High quality soft cover book printing
Paper Type: art paper 157g
Surface Finish: matt PP Lamination
Binding: Sewing Binding
Surface Disposal: Gloss / Matte Lamination, UV Coating,
Transport Package: Carton
Product Type: Book
Printing Type: Offset Printing
Book Cover: soft Cover with folding
Size : 210x285mm or Specific Requirements
Materials: White art Paper 157+250G
1. Do you offer design solution our products?
Custom design work is our specialty, we have own excellent designer to offer various design solutions base on your individual requirements.
We can help you develop smart, functional and user-friendly packaging solution.
2. What are your usual machines for production?
Offset printing machine, Automatic productions,
Die-cutting machine, Lamination machine, Hot stamping machine.
3. Samples lead time?
Sample would be submitted within 3-5 days.
4.How to pay the payment?
We open many ways to accept payment.
T/T L/C and so on.
5. When is your office hour?
You can order 24/7; Salesmen will get in touch with you once your order has been reviewed.
If you need personal assistance, please contact us by Email
Tips of printing:
The key to cutting a book in printing
After the mechanical folding, the binding should be tied to the flat, and the favorable conditions for the thickness of the back of the adhesive book can be created, so that the clamping mechanism of the perfect binding machine works reliably, and the thickness of the back of the book is consistent and square. Secondly, the binding process is thin and uniform when the upper side is glued, and the bonding is firm. Prevent the side glue from being too thick, and the back of the book is higher than the incision when it is cut on three sides. When the adhesive is applied, it should be as thick as possible according to the quality standard, and the wrinkle on the back of the book when the three sides are cut can be eliminated. And in the case of firm bonding, the back of the book should not be thicker than the incision, so that the back of the book can be slightly rounded, creating the same conditions for the size of the book on the three-sided cutting machine. When Anmei Mall finds three-sided cutting, it not only needs to adjust the knife gauge according to customer requirements, but also keeps the book size. Moreover, it is necessary to find out the waste book of this process, and find out the book that the fold is not allowed, the cut is not cut, the number of pages is matched, the side glue is not attached, or the book back is not firmly bonded. The important thing is to use the method of checking the slip number to find out the books such as the inner white page, serious dirty version, paper hole, inverted post, etc. Finally, put on the personal responsibility mark, implement the work responsibility, and ensure the printing quality of the whole book.
Cutting the book is the last process in the paperback processing. To make the finished product of the three-sided cutting machine the same size, not only the three-sided cutting machine
The size is adjusted as required, and in the binding process arrangement, the former process is formed as the purpose of the subsequent process service. Only when the first few processes create favorable conditions for the three-sided cutting, the three-sided cutting can guarantee the quality. Three sides
The cutting machine adjusts the machine according to the regulations, and eliminates the common cutting size in the operation of the three-side cutting machine. The book size is not correct, the left and right are skewed, and the incision is not smooth.
1 upper and lower knife
The reason is that the pressure of the pressure plate is not properly adjusted, the pressure is too large, the back of the book pile will be lifted, the pressure is too small, the book pile will bulge under the presser foot, and the size of the front surface of the book pile is larger than the normal size below after cutting. The height of the platen should be adjusted to 5~10mm from the stack; the paper is loose, and the upper layer of air is more. When the cutting knife is pressed, the paper moves, causing the upper size to be smaller than the normal size below; the signature should be bundled for 24h and then matched. After the matching, the flattening should be carried out; the back cover of the book feeding mechanism is not perpendicular to the worktable, and should be adjusted vertically; the cutting height is high, causing the pressure of the paper press to be large, the pulling force is large, and the paper is bent. The deformation is large, and the height of the cutting book is appropriately reduced; in the cutting mechanism, the track or bearing of the book holder is worn, so that the book holder is tilted forward and backward when the book is fed, so that the size of the book is different, the worn parts should be replaced, and the eccentricity of the bearing is readjusted. Make the gap consistent.
2 door cutters vary in size
The reason is that the components in the book feeding mechanism are not well matched; the needle bearing on the connecting rod is worn out, and the relevant bearing should be replaced regularly; the roller cam controlling the stroke of the book feeding mechanism has a gap, and the angle of the double ball should be re-adjusted The gap is eliminated; the nut on the swinging body is loosened, the clamping block is processed to make it lockable, and the inspector is often required to compare the production book with the sample book to prevent dimensional changes; If the stroke is different, it should be replaced; if there is a gap in the door cutter slide, it should be re-adjusted.
3 knife flower
The reason is that the incision has uneven blade marks, the blade is worn, and there is a collapsed blade phenomenon, and the knife should be changed or the knife should be sharpened in time.
4 days, the foot part is constantly cut
The reason is that the underside of the door knife and the side blade are not real or uneven; the side knife auxiliary slide has a gap with the slider or the eccentric positioning axis moves, causing the side knife to be lifted when undercutting, sometimes cutting continuously; before and after the upper knife The dimensions are inconsistent and cannot be cut. The blade position should be adjusted downwards.
5 broken head
The reason is that there is no knives device, or the rule of the knives is not suitable and should be used correctly. Anmei Mall feels that it should improve the requirements of the previous process to reduce the phenomenon of breaking the head. Ensure that the rubber layer is between 0.8 and 1.2mm, the rubber sheet is flat, and the package has no voids; the cover paper should not be too bad, the longitudinal direction of the fiber direction of the cover paper is parallel to the back ridge; the binding of the signature is tight, the milling back, The groove should be smooth, otherwise it is easy to make the adhesive loose, thicken the back of the book; the side glue can not be too thick, the book after the binding can not be inclined; properly reduce the cutting height and reduce the broken head. If the blade is not sharp and the corner is too small, the blade with a 19° angle should be used and sharpened sharply, and the glue attached to the blade cut is often scraped off, and paraffin or soap is applied.
6 book is cut after cutting
The reason is that the back cover of the booklet is not parallel with the doorknob, and the parallelism should be adjusted; the eccentric roller in the track of the booklet is not well adjusted, the gap is too large, the left and right are skewed, and the car should be adjusted without swinging; the upper casing is worn and Deformation should be replaced.
The reason is that the blade is used too long or cut too far, or the quality of the blade is not high. The blade cutting blade should be 0.5~1.0mm, and the blade should be changed frequently to keep the blade sharp.
8 The first head of each stack of books, the foot is close to the back, and the incision is not uniform.
The reason is that the pressure plate is not beveled or not pressed in place; the side glue is too thick, the book is too thin, and the cutting height is high. Respond to the problem.
9 book vents
The reason is that the top and bottom of the book is large and small with a curved shape; the pressure of the pressure plate is insufficient, the pressure should be increased; the distance between the lower pad and the door knife on the pressure plate is greater than 0.5mm, and the cardboard should be re-padded, with the book Cut out together, the same size, eliminate the spacing.