RVK3B self-reverse drum adjustment program
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
The RVK3B 4/0-2/2 single-sided four-color printing is converted to the bottom two-color printing program as follows:
1. Open the cover of the engine and press the front rudder until the pointer (1) is aligned with the zero position (the micro adjustment is rotated by the hand).
2. Twist the(b) to the right of the "bottom press" and the engine (c) to the right.
3. Press the steering lever (2).
4. Pull the pin clamp (3) of the supply cylinder, then pull out the live latch (4) and loosen the clamping screw (5).
5. Place the transfer roller into the pulley to adjust the paper size on the scale (6).
6. Pin the clamping screw (5).
7. Slightly shake the front and rear of the pulley until there is some micro-resistance, then turn the transfer roller to the position between the two and take out the transfer roller.
8. Pull back the pin clamp (3) in the supply cylinder.
9. Close the cover and - twist the selection (b) to the middle position "Continue printing". - Twist the engine (c) to the left. - Twist the "bottom print wind pump " (a) to the right.
10. Turn the bracelet (7) to the "bottom print mark" to adjust the opening and closing time of the intermediate paper feeder.
11. Prepare to boot.
RVK3B 2/2 chinging shat Aige bottom two-color printing conversion paper degree program is as follows:
1. Select (b) to the right to "bottom print and engine (c) to the right.
2. Open the cover on the engine side, then remove the pin clamp (3) and loosen the screw (5) in the supply cylinder.
3. The paper size required to place the transfer roller into the pulley and onto the scale.
4. Pin the clamping screw (5).
5. Use the transfer roller to turn the pulley back and forth until there is some micro resistance. Then turn the transfer roller between the two and take out the transfer roller.
6. Pull the pin clamp (3) on the supply cylinder back into place.
7. Close the cover and open the "bottom print wind pump " (a) to the right.
- Twist the choice (b) Go to the middle "Continue printing".
- Twist the engine to move (c) to the left.
8. If necessary, turn the bracelet (7) to adjust the opening and closing time of the intermediate paper feeder.
9. Prepare to boot.
RVK3B 2/2-4/0 bottom two-color printing is converted to single-sided four-color printing program as follows:
1. Open the cover on the side of the engine and press the front rim until the pointer (8) comes out.
2. Close the "bottom print wind pump " (a) (middle position) twist the single-sided printing (b) to the left, while twisting the engine to move (c) to the right.
3. Remove the pinch (3) from the supply cylinder and loosen the clamping screw (5).
4. Place the transfer roller into the pulley until the pointer (8) is aligned with the one-sided print mark.
5. Replace the live latch (4) and the pinch clamp screw (5).
6. Rotate the pulley back and forth until there is slight resistance, then roll the roller between the two and take out the transfer roller.
7. Pull the pin holder (3) of the supply cylinder back into place.
8. Turn the pulley until the pointer (1) is aligned to the zero position and then close the cover.
9. Pick up the steering lever (a).
10. Twist the selection (b) to the middle position and twist the engine (c) to the left.
11. Turn the bracelet (7) to print the mark on one side.
12. Prepare to boot.