What are the commonly used materials for pulling net display racks?
The dragnet display frame is generally composed of two parts: the picture and the grid. The material of the screen display frame is usually PVC, KT board, polylip cloth, etc., and can be covered with glossy film or matte film. PVC picture is suitable for magnetic photo pictures, with a magnetic strip pasted behind the film, which is directly sucked on the sticker of the shelf, and the display frame pictures on both sides wrap the side (only magnetic can be edging). Biyin Bazaar Network will give you an introduction to the picture material of these kinds of dragnet display racks.
Usually the PVC picture is made of several pieces of splicing, if you want to splice well, you must ensure that the printed picture is cut accurately, and the cutting must be very careful.
KT board splicing screen can be glued to the shelf with double-sided tape or adhesive tape, which is easy to disassemble and can be reused.
The high-definition picture pattern of Polylip cloth can be used with inkjet cloth, which is widely used in temporary meetings, exhibitions, weddings, shopping malls, etc. Polylip cloth needs to be left with edges to facilitate perforation installation.
The structural parts of the dragnet display frame are divided into two common materials: aluminum alloy and iron pipe. Different materials meet the different quality requirements of customers. The aluminum alloy is relatively high-end, and the iron pipe is relatively low-grade. The magnetic dragnet display frame is generally made of high-quality aluminum alloy material, and is connected by a magnetic strut in the middle, which is quick to disassemble and assemble, and can be reused many times.
The spring-loaded display rack is also made of aluminum, which is lightweight and easy to carry, and is equipped with magnetic stripes, PVC, and spotlights.