The solid density of four-color printing
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: 860681365@qq.com
For four-color printing, solid density is an important factor affecting color reproduction. The density of the field determines the thickness of the ink layer to a certain extent, and also determines the dot enlargement of the printed matter and the tone reproduction of the printed matter. Under normal circumstances, the originals are rich in layers, such as photos, and after being copied into printed matter, the layers will have some loss and compression. If the density of the field is too small, the reproduction ability of the hierarchy is low, so the density of the solid density is increased, and the amount of compression of the layer is reduced as much as possible, thereby improving the tone reproduction ability; however, if the density value in the field is too high, since the ink layer is too thick, and The influence of printing pressure, causing the expansion of the outlets to be too large, will also cause the loss of the hierarchy, especially the partial level of the dark adjustment is extremely easy to lose. Controlling the density of the field is therefore critical to the replication of the entire tone.
However, inks of different brands and different specifications are printed on different substrates, and the density in the field can be different, and the dot enlargement is also different. Therefore, in actual production, it is necessary to determine the optimum solid density and the appropriate dot gain value for different substrates and different inks.
A method for determining the optimum solid density and dot gain using print contrast is discussed herein.
Print contrast or K value refers to the contrast between solid density and dark density (mainly 75% or 80% density). The greater the contrast of the print, the more layers it can reproduce, and the richer the details of the dark tone; conversely, the smaller the print contrast, the less the level of reproduction. Its calculation formula is:
In the formula, Ds is the solid density value (which can be paper containing or minus paper density), and Dt is 75% or 80% density value (can be paper containing or minus paper density).
It can be seen from the formula that if the Ds value of a certain print is as large as possible and the Dt value is as small as possible, the print contrast can be maximized.
Of course, if the Ds and Dt are directly measured and then calculated, it is cumbersome, so the general spectrodensitometer has a direct measurement printing contrast function.