26
May 2019
Tray troubleshooting tips
Tray troubleshooting tips Once, during the normal printing process after loading and pulling the plate, the PS plate was partially torn and torn. After the failure occurs, if the printing is contin
26
May 2019
Manually printing the impression cylinder after offset printing
Manually printing the impression cylinder after offset printing
26
May 2019
Single machine glazing
Single machine glazing Single-machine glazing uses a special glazing machine to glaze the surface of the printed matter, that is, printing and glazing are performed on separate dedicated devices. S
26
May 2019
Discussion on the application of roller lining
Discussion on the application of roller lining The drum liner refers to various coverings wrapped around the surface of the drum outside the drum casing. Offset printing plate cylinders and blanket
25
May 2019
Rubber roller application new perspective
Rubber roller application new perspective In the selection of rubber rollers and their cleaning agents, we should pay attention to comprehensive benefits, reduce integration and cost, improve print
25
May 2019
How to deal with color reproduction neutral gray balance in print copying
How to deal with color reproduction neutral gray balance in print copying First, the concept of neutral gray balance The copying work of the printed matter is color restoration, tone reduction, te
25
May 2019
The mystery of GCR achromatic structure in digital prepress production
The mystery of GCR achromatic structure in digital prepress production In the printing industry of modern China, commercial rotary printing has sprung up. The launch of commercial rotary machines i
25
May 2019
How to use small offset printing paper for self-adhesive paper
How to use small offset printing paper for self-adhesive paper Typically, self-adhesive work is typically printed using a specialized web label printer. However, due to the unique structure of the
25
May 2019
Analysis and treatment of the causes of wrinkles in printed products
Analysis and treatment of the causes of wrinkles in printed products Printing wrinkle failure is a common failure phenomenon in the printing production process. Analysis of various phenomena of wri
25
May 2019
Troubleshooting due to printing pressure discomfort
Troubleshooting due to printing pressure discomfort Pressure is one of the important conditions for offset printing and embossing. Moderate printing pressure is also an effective technical measure
25
May 2019
The main reason for dialysis ink pile
The main reason for dialysis ink pile The ink stack is directly related to the agglomeration of the ink, which can cause gelation of the ink and vitrification of the printed ink film. Appropriate a
25
May 2019
Paper offset process stacking troubleshooting
Paper offset process stacking troubleshooting In the offset printing process, due to the sizing pore structure, smoothness, absorbency, viscoelasticity, etc. of the paper, the filler, the rubber co
