Classification of plastic bags - according to the way of bag making
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
There are many kinds of plastic packaging bags, and the specifications are uncertain. Therefore, the design and production staff often neglect the bag making method. As a result, although the design draft is exquisite, the finished packaging is unsatisfactory and even becomes a waste product. Experience tells us that only by understanding the types of commonly used packaging products can we make full use of the design ideas, eliminate design works that do not conform to the bag making process, and design practical and perfect finished packaging.
Plastic packaging bags can be divided into three types: three-side seal, mid-bottom seal, three-dimensional middle seal and sheet material according to the bag making method.
The three-side seal is sealed around the packaging bag. The size of the front and back are finished products, which have a certain overall sense. The design is not constrained, and the front and rear designs have a certain consistency. Since the front and back dimensions are the same, you can design the front side to match the back and front. When making plates, the front and back should be arranged on the same set of rollers.
The midsole seal is sealed on the back, the front size is the finished size, the back is divided into two equal parts, and the sum of the widths is equal to the width of the front. Usually, the front and back sides are unfolded during design, and the design is integrated. Each 1cm edge is added, and the front and back are also on the same set of rollers.
The three-dimensional middle seal is based on the middle bottom seal, and the three-dimensional side is added on both sides, and the front back and the side three sides are also on the same set of cylinders.
Due to the limitation of printed materials, the front and back sides of the sheet must be designed separately and separately, and cannot be simultaneously displayed on the same set of cylinders.