Carton and print quality
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
As we all know, the key factors affecting product quality are equipment, raw materials, personnel, and the environment. The carton packaging industry is no different. In order to build a high-quality brand, many companies will spare no effort to upgrade their equipment, make technological advances, strictly control the entry of raw paper into the factory, invite talents from the world, and improve the working environment. These are commendable, but good at research, good at creation, and good at doing. Those who are interested will also benefit a lot. Here, we will briefly describe the experience of improving the quality of the carton from the perspective of ink printing.
First, to ensure the clarity of printing
Firstly, the printing plate should be made of wear-resistant, moderately elastic and high-quality materials. The thickness of the same plate should be the same. The thickness of the resin plate should be no less than 4mm, and the rubber plate should be 6-7mm. Whether it is made with a negative film or a hand-cut, the layout must be neat, the handwriting pattern, the line depth is not less than 3mm, the arrangement of the text pattern should not be overcrowded, the arc should be smooth, the thickness should be uniform, and the straight line should be straight and smooth. . When printing, the ink should be properly lightened, the ink layer of the ink-coated roller should not be too thick, and the pressure of the roller should be moderate, so that the printing ink is uniform, and the surface of the box is not obviously dent. It is forbidden to increase the ink concentration and increase the pressure of the applicator roller to improve the printing effect. This will not achieve the desired purpose, but will lead to the printing paste ink, the printing quality is even worse, especially the text is small, the pattern is complicated, and the lines are delicate. Overprinting requires a high-precision layout, the disadvantage is more obvious; the speed of the printing machine can not be lower than 800 rev / min, too low, the surface of the box is uneven, and there is a bottom phenomenon. Too fast, the ink is too thick, the layout is easy to blur, and at the same time, it is necessary to prevent the paper hair, paper scraps, etc. from entering the printing machine and sticking to the printing plate. If it is found that there is paper scraping, stop it immediately, wipe it with a rag and alcohol.
Second, the printing color should be pure, no color difference in batch
The quality of water-based inks is related to the purity and brightness of carton printing. Therefore, pay attention to the selection. There is no obvious difference between high-quality ink and color standard. The hand feel is fine and viscous. The concentration is suitable for adding water or alcohol solvent to dilute without precipitation and agglomeration. It is stirred with wood stick and no foam is produced. It is mixed with other inks, and the affinity is good. The phenomenon of dissolution, the color of the ink is pure, and there is no abnormal reaction. Otherwise, it cannot be used.
It is best to print in batches at the time of printing. Otherwise, the same barrel of ink will be used, and color difference will also occur. The reason is that the original ink is diluted with water or alcohol solvent, and is not sealed. It is exposed to the air for a long time, and the chemical components in the ink react with oxygen in the air, that is, the pigment is lowered, and the strong light also decomposes on the ink.
Third, to prevent overprinting and ghosting when printing whiteboard carton
When the coated whiteboard paper is manufactured, the coating liquid used for coating the whiteboard contains glue, and the surface of the high-grade whiteboard paper is coated with a small amount of glazing wax, so when the whiteboard is used as a paper box for printing, the printing plate and the whiteboard paper are printed. There is slippage at the moment of contact. In addition, the pressure of the printing plate is too heavy, the water-based ink is not easy to permeate, the printing of the carton ink is slow, the printing is continuous, the printing products are stacked on top of each other, and the surface of the box is scratched to form an overprinting ghost.
To solve this problem, the ink should be diluted with ethanol, do not use water, because it is not volatile, it is not suitable for drying the ink; the printing pressure is appropriately reduced, the printing speed should not be too fast, and it is not suitable for 600 rpm. Add the exhaust fan or the hot air drying box ink before the stacking of the printing machine.
Fourth, to ensure overprint accuracy
The accuracy of overprinting depends first on the precision of the equipment and whether the adjustment of the paper-feeding board is parallel, and the layout, assembly and calibration. Let's talk about the overprint accuracy in terms of layout collage.
After the printing plate is completed, take a 0.5mm thick transparent polypropylene plate base, draw a vertical line at the center of its length, and then press the size of the carton to be printed, draw the long and wide high side lines with a small stroke, and then press the sample or sample box. Production notices specify imposition. After the position of the layout is positioned, the pen is drawn according to the edge of the plate, and then the same size plate is prepared in advance, covering the base of the drawn line, and all the edges are accurately drawn (for example, the three colors of the overprint can be further drawn). ), and finally press the color of the overprint, and the corresponding printing plate is firmly glued to the painted position with neoprene. Then, the printing plate is attached to the roller of the printing machine by double-sided tape, and the center line of the plate is aligned with the center line of the printing plate of the printing machine. As long as the position of the imposition is accurate, other objective conditions are satisfied, and the overprinting is accurate.
Fifth, the impact of full-page printing on the strength of the carton
We know that when carton printing, corrugated cardboard is formed by the paper guide rollers and printing rollers of the printing press and transferred to the grooved part. After the paperboard is subjected to the pressure of the roller during the transfer process, its physical properties have changed to different degrees, which is inevitable. Affects the strength of the carton. The full-page printing is particularly prominent. The strength of the carton of the same material is reduced by about 30% compared with the non-printing. Therefore, the production process should be very careful, and the following measures can be taken to alleviate:
First, properly adjust the gap between the paper guide rollers of the printing machine, so that the paperboard should pass smoothly without deformation (slightly smaller than the thickness of the cardboard 0.1-0.15mm); second, the pressure of the printing plate can be adjusted to meet the printing clarity. The handle of the box is not recessed and flat. Thirdly, the speed of the printing press (1000 rpm or more) is appropriately increased, so that the cardboard passes through the printing machine as soon as possible, reducing the pressing time of the cardboard.
Sixth, the carton leaked in time to print
In the actual production of a printing machine without a computer calibration device, due to the operator's negligence, the phenomenon of missing words is difficult to avoid. Remedial measures should be taken in a timely manner after similar incidents occur. If the slotting angle is not yet nailed, the slotting knife can be removed, the missing layout can be subsidized to the corresponding position, and then the other nozzle plates can be removed to be reprinted, but the speed is too fast, otherwise it will cause The printing effect is not good or the layout is running. If the printed carton has been stapled, in addition to the layout as described above, it is also necessary to adjust the gap between the guide rollers until the carton passes smoothly without deformation. The pressure of the printing roller should be adjusted appropriately, and then transferred to the paper. Part of the board, determine the layout position, a single delivery when printing.
Seven, printing notes on thin cardboard
The so-called thin cardboard, that is, D, E fine corrugated cardboard, these paperboards are stamped and formed by the flat die-cutting machine after printing. Because the batch is small or the customer only does it once, and the cost of the die-cutting die is high, so the production is Switch to slotting. In actual operation, because the cardboard is too thin, the printing speed must be slowed down, but the paper feeder is not difficult to push the paper, that is, the multiple sheets of paper are simultaneously pushed into the printing machine, causing a lot of waste. To solve this problem, you can use a single machine to slot, after binding and then printing, just according to the two positive sides of the carton different editions, two times to print a complete layout of the carton.
Eight, warped cardboard to prevent running, slotting
Take a single sheet feeding on the warped cardboard printing, and run at a low speed. At the same time, adjust the suction volume appropriately. According to the layout and slotting, click the plate slot phase correction in time. The paperboard with severe warpage is selected, and each 3-5 sheets of positive and negative stacking is flattened with the weight again, or folded along the indentation line in the opposite direction of the warp.
In short, the actual situation encountered in the actual production must be treated flexibly according to objective conditions. The above is for reference only. Due to the limitations of the author's level, there are definitely some shortcomings. I would like to discuss it with my peers.