Printing term
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
White/leak white: The printing paper is mostly white. When printing or plate making, the color of the connection is not close, revealing the white background.
Whitening: Photographic process in the era of hanging nets. In order to remedy the insufficiency of the darkness of the Internet picture, you can remove the original flash once or put a piece of paper to fill the spot exposure, or use the flash light directly to flash the white light to increase the deep web of the original and soften the image.
Explosive fat: Of course, overeating will be fat, and the feeling of light in the film will increase the site. The manual plate is added to the photosensitive film by adding transparent thick film to expose and add fertilizer.
Colortrapping: It is intended to make the color transfer position expand and explode when the color separation plate is made, which reduces the influence of inaccurate overprinting.
Field: Refers to the area of the patch without dots, usually referred to as the full version.
Anti-white: text or lines are printed with negative lines, revealing white paper.
Hit the net: not a fisherman's craft. The amplitude modulation network color separation process, the dot angle distribution error, or the distance of each corner is less than 25 °, the moiré begins to be obvious.
Flying net: The technique of hanging the screen for lens plate making, remove the hanging net after normal exposure, and add a short exposure to increase the contrast.
Dog teeth: The dog's teeth are staggered. The image is out of pixels, and the dog's teeth appear on the enlarged edge.
Rose point: a net like a deer. The poor is called the pattern, and the worse is the turtle pattern.
At the same time: the instruction of the layout is based on the prefix. Extended to imposition, binding, refers to the head position as the benchmark.
Spreading tail: A type of text typesetting. Only find the kerning uniform, do not ask for the end of the text.
Mask: Not an Ecstasy. It is a mask for manual color separation. It can be used for filming or red film cutting. It can be used for retreating or repairing colors.
Blue version: not playing basketball, nor RGB B (blue), but C (green) version of CMYK. print
Ghost: A print or shadow of unknown origin. Due to uneven ink supply due to old printing presses.
Melon: It doesn't mean that the melon is a dog. In the era of typography, the "mafia" type of tablets used a more typesetting lead than the lower ones. Inktrapping: The overlap ratio of each color layer.
Fighting the muscles: learning the mastery of Sun Wukong. The bottom printing car has an automatic paper-turning device, which bites the paper-printing surface and reverses the tail of the paper to make it in one go.
Reflexive: Refers to a printing method that saves printing plates. Let the paper print one side first. After drying, the paper is reversed and the bottom surface is reversed. It is called the bottom self-reverse version, and the paper tail is reversed when the bottom surface of the tooth is reversed. It is the process of printing the same on the back of the paper.
Flying ink: The printing machine rotates fast and the ink body is not thick enough, and the centrifugal force causes the ink to splash.
Ink line: draw a rule line on the plate so that it is printed on the paper gauge, and the needle position can be monitored at a glance.
Fouling: The printing plate is not hydrophilic, it becomes lipophilic, and of course it is thin and oily. The problem is that the pH of the water is wrong.
Cannon: Commonly known as cannon and roller. The action of the blanket cylinder leaving the impression cylinder.
Clip gun: too much paper is sandwiched between the impression cylinder and the blanket cylinder, and the safety induction stops the printing machine.
Which slag: ink should not be printed on the paper, the problem is also in the ink and water balance.
Snoring: The printing machine stops rotating. The reason is mostly that the paper feed is not smooth or the double feed triggers the safety device.
Needle position: not the position of the injection. The margin of the printed sheet. The length of the paper is long, and the printing color and cutting need to be aligned with the needle position.
Continuous drying: saving the continuous printing process of the film. Use the register cross to move the exposure.
Over the bottom: the terminology of printing accidents. The ink layer is too thick to dry, contaminating the back of the paper pressed on it.
Front (sound): The Philippines calls the driver the front. The printed front is not the captain, but the number of printing speeds.
Number of stones: The name of the number of prints in the era of the stone seal. The paper is embossed once and is called a stone.
Used: Not referring to second-hand goods. Refers to the deputy of the printing press, or .
Manuscript: It is not a hatred of the manuscript, but a pre-printed sample of a formal print through a proofing machine.
Feida: It is not a courier, it is a conveyor for feeding paper from a printing machine. Binding
Bleeding: Of course, bleeding by the knife. The printing and binding process requires that the ground color or picture of the page must be 3mm beyond the cutting line, called bleeding.
Flash: fly, cut, remove. The flashing edge refers to the removal of the bleeding margin, which is the binding term.
Cut oblique: deformation, cutting and cutting, right angle to the angle of the book, mostly caused by uneven paper pressure or paper grid is not caused.
Polishing: The printed sheet is treated with a calender roller, and the surface will be smooth. This is a surface treatment process.
Backhand folding: Origami of Japanese folding machine. The 4th fold of the 32nd edition must be folded.
Genuine: Not referring to software. The first version of the book version is called genuine, the second code is called the reverse version, and the front and back versions are called a group, a post or a box.
Paper gate: It is not a paper-cut door, but a paper-cutting machine.
Riding Stud: A method of bookbinding that moves like a horse. After the thin book (6 posts or less) is set, it is placed on the iron frame to wear the iron wire nail.
Pig Intestine Roll: A method of folding a book sticker. The action is like a roll of the intestine powder. It can be folded into 32 versions with 3 shuttles.
Organ Fold: A method of folding a book. The book is folded and opened like a screen.
Anti-cover: A method of hand-binding the cover, first set the bottom edge to glue the position, then the top edge of the spine, and then make a "reverse" cover action.
Mao Shu: It is not a long hair of a book. It refers to a blank book that has been locked and not cut on the cover.
Taro cloth: A piece of cloth that connects the upper and lower sides of the hardcover book ridge. It has a firm and beautiful appearance.
Fire Seal: A processing action on a hardcover cover such as bronzing and high humidity. typesetting
High-profile: The picture of the light-receiving picture is of course bright and white, and the Japanese color-separating style likes the high-light position without dots to lengthen the picture level.
Low-key: It is not a weak voice, it means that the picture is dark, or dark.
Explosion: It is not a terrorist incident. Insufficient memory or disk space can cause the computer to die.
Pound: Not referring to weight. It is a measure of font typesetting. The minimum unit of English letters is Point, 1 inch is 72 units.
Level: It does not refer to the class. The era of optical phototype refers to the size of the text, and the level 4 is 1 mm.
No.: It is not a horn. It refers to the size of the font in the lead printing era. The maximum special number is 72 lbs and the smallest 8 pt is 5 lbs.
Flat body: It does not mean hair style, but refers to deforming the square shape with a lens to make the word flat, flat 1 is 10% (10%), flat 2 is 2%, flat 3 is 3%, and flat 4 is 40%.
Long body: It does not refer to the body type, but refers to the narrow body. The length is 1 narrow and 1%, the length 2 is 2% narrow, the length 3 is 3% narrow, and the length 4 is 4% narrow.
Airbrush: Use a compressed air spray pen to spray with a gas brush. Handmade gradient color method before the DTP era.