Introduction to common printing imposition methods
We are a big printing company in Shenzhen China . We offer all book publications, hardcover book printing, papercover book printing, hardcover notebook, sprial book printing, saddle stiching book printing, booklet printing,packaging box, calendars, all kinds of PVC, product brochures, notes, Children's book, stickers, all kinds of special paper color printing products, game cardand so on.
For more information please visit
http://www.joyful-printing.com. ENG only
http://www.joyful-printing.net
http://www.joyful-printing.org
email: info@joyful-printing.net
1. Single-sided: This method refers to prints that only need to print one side, such as posters, only need to print the front side, while the back side does not need to be printed.
2, double-sided: commonly known as "bottom version", refers to both sides of the printed matter that needs to be printed, such as some small leaflets, small posters, cards, etc.
3, horizontal type: commonly known as "self-reversed version", "on the face of the face", suitable for magazines, books and magazines, such as a 16-page magazine cover, divided into one, two, three, four Wait for the four layouts to be printed. In the imposition, seal one and seal four, seal two and seal three horizontally together, then seal one and seal four, seal two and seal three heads to each other in a four-open Printing on the layout, after one side of printing, the paper is rotated 180 degrees, and the printing is continued with the reverse side. After the completion, the printed matter is cut from the middle, and two identical prints can be obtained.
4. Flip type: After printing on one side of the paper with the same printing plate, flip the paper to the back of the printing, but use the other long side of the paper as the “biting edge”. This method is commonly known as "fighting bucket", but now few people have used this method again.