Common pre-press computer output error
1. The image scanning level is insufficient.
2. The image scanning ratio is incorrectly calculated.
3. The image level placed is insufficient and the cutting is not accurate.
4. Place the image of the error.
5. Use a low solution to make the output.
6. The rgb image is output without being converted to cmyk.
7, the image decontamination is not complete.
8, the retreat is not appropriate, starting from the white side, we must redo the land.
9, no word output.
10. Use the wrong word output.
11. Output with the damaged word.
12. Output the damaged document.
13. Scan with the wrong map.
14. Use the damaged software to make the output.
15. Black characters are not overprinted.
16, black field did not add a blue version.
17, color version output error, four colors out of the spot color, the spot color out of four colors.
18, to the negative film but the sun, or vice versa.
19, the direction of the output film is wrong, the film wants to go up, up and down.
20, similar pictures, scanning is not uniform, you need to redo the scanning and output process.
21, image color correction plus or minus errors, to redo the color.
22. The highlights are wrong when scanning.
23. The rgb color block in the manuscript is not converted to cmyk.
24, the number of output is wrong, but there are three sets of one set, but only three sets of three sets.
25. Repeat the output of the non-forest that has been output.
26. The scaling is wrong when outputting.
27, non-forest size is insufficient, a3 draft used a4 non-forest.
28. The flatness straightness setting is wrong, or the wrong printerdrive is selected.
29, the output of the error file, but a draft of the manuscript.
30. The number of error pages, but the fifth page is the sixth page.
31. There are more pages, and on page 5, there is a fifth page.
32. Use the wrong corner to output.
33. Use the wrong network to output.
34. The resolution setting is incorrect during scanning.
35, the output density is too high or too low, causing the outlet to be too fat or too thin